BA4558F |
RFQ for BA4558F Required Field |
 |
| Technical/Catalog Information | BA4558F-E2 |
| Vendor | Rohm Semiconductor(VA) |
| Category | Integrated Circuits (ICs) |
| Packaging | Digi-Reel? |
| Amplifier Type | General Purpose |
| Number of Circuits | 2 - Dual |
| Package / Case | 8-SOP |
| Slew Rate | 1.2 V/s |
| Gain Bandwidth Product | 2MHz |
| Current - Supply | 3mA |
| Current - Output / Channel | 10mA |
| Voltage - Supply, Single/Dual (±) | 8 V ~ 30 V, ±4 V ~ 15 V |
| Output Type | - |
| -3db Bandwidth | - |
| Current - Input Bias | 60nA |
| Operating Temperature | -40°C ~ 85°C |
| Voltage - Input Offset | 500V |
| Drawing Number | * |
| Lead Free Status | Lead Free |
| RoHS Status | RoHS Compliant |
| Other Names | BA4558F E2 BA4558FE2 BA4558F E2DKR ND BA4558FE2DKRND BA4558F-E2DKR |
| Product | Manufacturers | Pack | D/C |
| BA4558F | - | - | 07/08+ |
The BA4558, BA4558F, and BA4558N are monolithic ICs with two operational amplifiers featuring low power consumption and internal phase compensation mounted on a single silicon chip. These products offer high speed, a wide band width, and low noise.
Outstanding thermal characteristics and voltage gain band width make these ICs ideal for use in a wide variety of electronic circuits. The BA4558 comes in an 8-pin DIP package and is compatible with the 4558 operational amplifier. The BA4558F comes in an 8-pin SOP package, and the BA4558N in an 8-pin SIP package.
Typical Application |
Features |
| · Active filters· Audio amplifiers· VCOs· Other electronic circuits | 1) Low power dissipation of approximately 50mW (typ.).2) Built-in output short-circuit protection circuit.3) Internal phase compensation.4) No latch-up.5) Wide range of common mode and differential voltage.6) High gain and low noise. |
| Parameter | Symbol | Limits | Unit | ||
| BA4558 | BA4558F | BA4558N | |||
| Power supply voltage | VCC | ± 18 | ± 18 | ± 18 | V |
| Power dissipation | Pd | 800* | 550* | 900* | mW |
| Differential input voltage | Vid | ± 30 | V | ||
| Common-mode input voltage | Vi | ± 15 | V | ||
| Operating temperature | Topr | 40 ~ + 85 | °C | ||
| Storage temperature | Tstg | 55 ~ + 125 | °C | ||
* Refer to Pd characteristics diagram.
The values for the BA4558F are those when it is mounted on a glass epoxy board ( 50mm ´ 50mm ´ 1.6mm) .
